APPLICATION: WORKS WITH SAVAGE 21 RTR, 25 RTR, & 25 SS
This very "cool" billet aluminum mount not only looks great but it also provides additional heat sink area to help transfer away more heat from your engine. This additional heat sink capacity could be helpful if your Savage sees a lot of low speed off-road driving (like climbing and maneuvering through rough terrain) were the engine cooling head does not get a lot of high speed air flowing across it.
This can also be combined with a billet aluminum engine mount like the GPMSAV1080 - which should also help transfer more heat away from the engine than the stock die cast engine mount.
IMPORTANT NOTE: If you have the GPM Titanium Main Drive Shafts or plan to get them, then please read this... We had a customer contact us with some feedback about this engine plate and the GPM Titanium Main Drive Shafts. Apparently, there was a little bit of interference between the GPM Titanium Main Drive Shafts and the a few of the fins on this engine plate. The customer used a Dremel to knock off the corners of a few of the fins to make room for the GPM drive shafts. It can be made to fit fine with the GPM shafts, but it will require a little work with a Dremel or file.
